BAL Adhesive & Levelling Compound

Tubs & Tiles have partnered with BAL to provide the best solutions available for both domestic and commercial projects and offer an unrivalled 25 year guarantee when products are used as specified.

Primer - Preparation is key when tiling to ensure a high quality, long lasting result from your tiles. BAL primer is used to prepare the surface and increase the bond of the adhesive, levelling and waterproofing compounds onto the surface. Substrates that may be porous or impervious, very smooth or rough, or dusty and powdery require a primer.

Levelling & Smoothing Compounds - Bal Level Max is an all-in-one floor leveller with Fibre Strand Technology (FST) for added flexibility and strength, self-smoothing capability, and low shrinkage. BAL Level Max has a maximum bed depth up to 80mm in a single application – the largest in the market. It is suitable for use over timber at 3mm, accepts foot traffic in three hours and can be tiled after only four hours.

Water Proofing - BAL Tank-it and Waterproofing Kits provide total waterproof protection which is ideal for power showers, wet rooms and total immersion areas.

Uncoupling Matting - Protecting floor tiling against cracks, fractures and other damage caused by stresses and lateral movement in the substrate, it is suitable for most problematic floor substrates including timber floors, new screeds and floors with under-tile heating systems.

Wall & Floor Tile Adhesive - Adhesive creates the foundation for your tiles and we can offer a comprehensive range of market leading innovative solutions from BAL. The expert team at Tubs & Tiles will advise on how to choose the correct tile adhesive according to the tile type, size and purpose.

Adhesive for Large Format Floor Tiles - Large format tiles have specific requirements to ensure correct adhesion and a beautiful long lasting finish. BAL Stone & Tile PTB flexible floor tile adhesive is recommended for large format floor tiles to prevent problems such as lippage, hollow sounds, tile cracking or de-bonding over time.

Tile Grout & Sealant - BAL Micromax 2 and matching Micromax sealants are strong and flexible to avoid shrinkage, slumping or cracking. They suitable for walls and floors and are available in 10 colours which can be used to complement or contrast with your choice of tiles. Micromax2 contains built-in Microban® protection which inhibits the growth of bacteria and unsightly black mould.

Stone & Tile Ptb

Stone & Tile Ptb
  • Most large tile types (including porcelain)/ uneven surfaces
  • Dry/wet – interior/exterior
  • Including swimming pool bases/wet room floors
  • Grout After: 3 hours
  • Colours: Grey and White
  • Water/frost-resistant

Green Screed

Green Screed
  • Enhancing adhesion to low porosity substrates
  • Most tile types, including porcelain
  • Dry/wet – interior/exterior
  • Including swimming pools/showers
  • Grout After: 24 hours
  • Colour: Grey
  • Water/frost-resistant

Max-Flex Fibre

Max-Flex Fibre
  • Most tile types, including porcelain
  • Dry/wet – interior/exterior
  • Including swimming pools
  • Grout After: 16 hours
  • Colour: Grey (20kg only) / White (20kg/10kg/5kg)
  • Excellent non-slip and bond strength
  • Water/frost-resistant

Supercover Rapid Flex

Supercover Rapid Flex
  • Most tile types including porcelain
  • Dry/Wet – Interior/Exterior
  • Swimming Pools/Total immersion areas
  • Showers
  • Grout After: 3 Hours
  • Colour: Grey & White

Level Max

Level Max
  • Preparing floors for tiling
  • Most substrates
  • Dry/wet – interior
  • Suitable for timber floors at 3mm
  • Levelling backgrounds from 2mm – 80mm in single application
  • Suitable for use with Under Floor Heating
  • Self Smoothing
  • Tile After: 4 hours
  • Colour: Grey

Single Part Flexible

Single Part Flexible
  • Most tile types, including porcelain
  • Dry/Wet – interior/exterior
  • Including showers/swimming pools/ total immersion
  • Grout After: 16 hours
  • Colours: Grey (20kg only) / White (20kg/10kg)
Sign Up